How to Fix Loop “Delay in Automatic Repair” Windows 10

The auto repair loop error occurs when Windows 10 tries to launch and fails, then automatically opens the default repair tool and tries to fix itself. If Windows cannot repair itself, it restarts and repeats itself in a never-ending cycle. There is no single reason Windows 10 is an automatic repair loop, and it can be challenging to find. The most common cause is that there are no system files or corrupt files, which Windows cannot start or repair because these critical files that need to be processed are not available.

Missing device drivers are often a significant cause of the error. If you have just upgraded your PC, your new components will need device drivers to allow Windows to run them. If drivers are lost, out of date, or unsupported, they can cause a repair loop. New peripherals can also cause this error if their drivers are not correctly installed. Learn more about PC and Mac issue with the help of Validedge where you can find other effective ways. Other possible causes are often associated with faulty components, malware infection, corrupt system registry, and even broken installation files. However, no worries, as our solutions will work for most of the causes of the Windows 10 auto repair loop.

Launch Fixboot and Chkdsk Commands

The command introduces a low-level drive test for your system to detect errors using the Disk Check app. If it detects errors, it will correct them automatically. If you cannot identify any cause of the Windows 10 automatic repair loop, you can use repair tools to try to repair it.

While Windows may not start, you can still force Windows to start using the advanced options menu screen in the command prompt window.

To do this:

Restart your PC and press the F8 key on your keyboard before the Windows logo and spinning icon appear. This will create a Windows Troubleshooting menu to appear. Select See advanced configuration options to get started.

From the Select screen option, select Troubleshooting> Advanced Options> Command Prompt.

Enhanced Windows 10 upgrade

In the Command Prompt window, type out the command given below and press Enter:

Chkdsk c: / r

If the command fails, you can try using the Fixboot command again. In the same Command Prompt window, type out the following command and press Enter:

Fixboot c:

shut the Command Prompt window and restart your PC when you are done.

Perform System Scanning in Safe Mode

When debug tools find corrupted files, Windows replaces those files with a local image. However, if this image is corrupted, Windows may not repair itself and cause the previous commands to fail. We can use the DISM (Deployment Image Servicing and Management) tool to address this.

To use this tool, we must first turn on Safe Mode. This downloads the basic version of Windows without any third-party programs to help you fix your startup errors.

The first step, as before, is to restart your PC and press the F8 key when you start to open the Windows troubleshooting menu.

Select View advanced debug options> Troubleshooting> Advanced options> Startup programs> Restart.

Now, you will see a list of various restart options. Select Enable Safe Mode with Networking by selecting F5 on your keyboard.

When Windows starts with Safe Mode, right-click the Start menu and select Windows PowerShell (Admin).

In the PowerShell window, type out the following command and press Enter:

DISM / Online / Cleanup-Image / RestoreHealth

This will take time to complete. Once the DISM tool is complete, restart your PC and follow the steps above to open the PowerShell window in safe mode again.

In this case, type out the following command and press Enter:

Sfc / scannow

This will check the integrity of the Windows system files and ensure that Windows is fully repaired.

Restore Windows Registration

In some cases, malware infection or disk problems can corrupt registry files.

To fix subscription problems, you can get it back with the following steps:

Open the Windows Troubleshooting menu.

Select View advanced debug options> Troubleshooting> Advanced options> Command Prompt.

Type the following command and press Enter:

C: \ Windows \ System32 \ config \ regback * C: \ Windows \ System32 \ config \

When prompted to type over files, type All and press Enter.

When you are done, restart your PC.

Disable Automatic Repair Tool

If you believe your Windows is running, you can try disabling the default startup program. This should allow you to get started on Windows without loading the loop. However, this will only work successfully if your Windows system runs correctly. You can use it to find out if your Windows is really bad.

To disable Windows 10 repair tool, follow these steps:

Open the Windows Troubleshooting menu.

Select View advanced debug options> Troubleshooting> Advanced options> Command Prompt.

Type out the command mentioned below and press Enter: bcdedit

Check prices for ownership and power acquisition. Reference value must be {default} and allowed to be yes again.

Now, type this command and press Enter:

The bcdedit / set {default} number is enabled

This will disable the automatic boot adjustment. If the command does not work, try the following command:

bcdedit / set {current} is number enabled

When you are done, restart your PC.

Reset Your Windows 10 Device Files.

You do not have to worry about losing your files and data, as you have the option to proceed with a clean reset (delete everything) or save your data. The last computer locked in the auto repair loop restarts Windows 10.

To reset Windows 10 PC, open the Windows troubleshooter menu and select Troubleshooting> Reset this PC.

Dealing with Automatic Repair Loop

It can be frustrating to face an endless loop because of a tool designed to solve your problems. It can be challenging to diagnose and understand, but our solutions will help your PC back to normal.